Gearbox mount BMW Getrag DCT GS7D36SG

The bracket is made to fit together with ASS Gearbox mount BMW ZF 5vxl Volvo 240 and ASS Gearbox beam BMW ZF 6vxl Volvo 740/940 (new gereration). But it also works fine to be used loosely in other bodies if you build your own gearbox beam.

This is a large gearbox and it is usually necessary to cut away some reinforcements that stick out from the gearbox and also tap a bit in the gearbox tunnel to give some space at a couple of points. There is a little less space on the Volvo 240 than on the 740/940.

For the Volvo 240, in some cases it can be a problem that the gearbox ends up too far back because it is so long and if you use a thick adapter plate against the engine. Then it also does not fit with the gearbox beam, which does not have attachment points that far back. An example of when it does not fit with a 240 gearbox beam is with an LS V8 engine and 25mm spacer plate. If you need help with a solution in a similar case on the Volvo 240, please contact us, we have a special beam that is not available in the trade.