Description

Most Mazda MX-5 owners are familiar with rusting or damaged frame rails under the car. In fact, for owners of a lowered MX-5, scraping the frame rails will probably be a daily occurrence….

Given that the frame rails of a Mazda MX-5 are the lowest point of the car, there is a chance that they could be damaged at high thresholds. Paint damage that will later rust or completely destroyed frame rails are therefore no exception. Repair Panels With our repair panels, you can replace the damaged frame rails to restore strength to the chassis and remove any rust. All drainage holes and mounting points on our Mazda MX-5 frame rail repair panels match those of the original frame rails. Thus, after the repair, you easily reinstall the original fuel lines. Our frame rails run up to the point where they transition into 2 layers. Because this point is sometimes subject to rust, the repair panels on either side are slightly longer than necessary. This is easily shortened with a grinder or saw. Assembly After removing the old frame rails by drilling out all the spot welds, the repair panels can be installed. The repair panels feature 6mm openings every 4cm that allow the whole thing to be reattached to the Mazda MX-5 with prop welding. Remember to remove the carpet and other flammable items before welding on the car! Material The repair panels are made of 1.5mm CNC cut and edged ZinCor (electrolytically galvanized) plate. What’s included in the kit:

• 1x Mazda MX-5 frame rail repair panel incl. welding nuts  (If you want to repair both sides, order 2 pieces)