ASS Gearbox Mount Volvo 740 / 940 - GM 4L60 / T56

Tailor-made gearbox crossmember for 740/940, fits many GM automatic and manual gearboxes, e.g. 4L60, T56-T5 together with LS engine and our engine mounts (AS-001020-01).
The beam has multiple mounting holes to the body and to the gearbox mount/rubber bushing, which gives it a lot of mounting options longitudinally.
Strong and slim design.
Depending on the gearbox you choose, you may need to tap and possibly make some cut-outs in the gearbox tunnel.
However, the beam does not fit the large 4L80 gearbox.
The mounting of that gearbox is too far back and you will have to cut a lot out of the tunnel to be able to mount it.
The beam is made to fit the standard gearbox mount/gearbox rubber shown as an example in the manual.
The dimensions of the gearbox rubber should be approximately 46mm high and the c-c thread holes approximately 38mm.
Check the height of your gearbox between the center of the output shaft and the bottom of the rubber bush.
It should be approximately 116 mm for a good height with this beam.

They are made of 4 mm high-strength steel plate and are zinc-iron chromated and black passivated.
A kit consists of: bracket incl. all screws needed for mounting in beam and body.

Manual: AS-002009-01 Instruction